本文選題：入侵定位 + TDC　； 參考：《安徽理工大學》2017年碩士論文

【摘要】：目前光纖安防系統在技術上取得了很大的進步,但仍然存在一些問題,比如現有光纖周界安防系統的定位精度達不到某些重要部門的要求,不能對入侵事件的特征進行準確的分析,從而導致誤報率非常高。針對目前光纖周界安防系統中存在的缺點,為了提高系統的定位精度,降低入侵特征的誤判率。設計了一款基于把入侵定位信號和入侵特征信號的獲取來源分開的一種區域周界光纖安防系統,取代原來的入侵定位信號和特征識別信號混合在一起的采集方案。本研究采用的是利用時間數字轉換技術(TDC)來對入侵地點進行定位,取代目前常用的通過解調干涉信號的相位差進行定位的方案。由于現有的時間數字轉換技術可以實現對超短時差進行測量,其分辨率能夠達到皮秒級,非常適合應用在光纖安防定位方面,進行精確定位和連續測距。由于光纖安防系統的入侵信號中不可避免的包含很多干擾信號,為了提高識別入侵特征信號的性能,降低系統的誤判率,本研究采用了基于入侵特征信號的數據庫查詢對比技術。本研究設計了以TDC獲得入侵時間差做為信號采集單元、以DSP2812芯片為控制板核心的入侵定位設計方案。完成了 TDC與DSP的通信模塊的結構和程序方案設計,DSP與上位機的通信模塊設計;應用LabVIEW工具用來存儲入侵信號以及進行信號特征量對比。通過搭建的實驗平臺,進行了基于TDC的入侵定位和上位機監控的聯合實驗調試,實驗結果驗證了系統的定位精度達到了預期設計目標;基于LabVIEW的監控界面顯示了入侵位置和時間信息并報警。采用模擬入侵信號,設計的基于LabVIEW和數據庫比對查詢來實現特征量識別的系統,仿真實驗結果證實了該設計是可行的。
[Abstract]:At present, great progress has been made in the technology of optical fiber security system, but there are still some problems. For example, the positioning accuracy of the existing optical fiber perimeter security system does not meet the requirements of some important departments. The characteristics of intrusion events can not be accurately analyzed, resulting in a very high false alarm rate. In order to improve the positioning accuracy of the optical fiber perimeter security system and reduce the error rate of the intrusion features, the shortcomings of the current optical fiber perimeter security system are discussed in order to improve the positioning accuracy of the system. Based on the separation of the source of intrusion location signal and intrusion characteristic signal, a zone perimeter optical fiber security system is designed to replace the original intrusion location signal and feature recognition signal. In this study, the time digital conversion (TDC) technique is used to locate the intrusion site, replacing the commonly used scheme of demodulating the phase difference of interference signal. Because the existing time-digital conversion technology can measure ultrashort time difference, and its resolution can reach picosecond level, it is very suitable for accurate location and continuous ranging in optical fiber security positioning. Because the intrusion signal of optical fiber security system inevitably contains a lot of interference signals, in order to improve the performance of identifying intrusion characteristic signal and reduce the misjudgment rate of the system, This research adopts the database query contrast technology based on intrusion feature signal. In this paper, an intrusion location scheme is designed, which takes TDC intrusion time difference as signal acquisition unit and DSP2812 chip as the core of control board. Structure and Program Design of Communication Module between TDC and DSP the communication module between DSP and host computer is designed, and LabVIEW is used to store the intrusion signal and compare the characteristic quantity of the signal. Through the experimental platform, the intrusion location based on TDC and the monitoring of the host computer are debugged. The experimental results verify that the positioning accuracy of the system has reached the desired design goal. The monitoring interface based on LabVIEW shows the intrusion location and time information and alarm. The system of feature recognition based on LabVIEW and database comparison query is designed by using simulated intrusion signal. The simulation results show that the design is feasible.
【學位授予單位】：安徽理工大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TP212;TP277

【參考文獻】

相關期刊論文 前10條

1 邢八一;徐方辰;;光纖周界安防系統技術現狀及市場前景分析[J];中國安防;2014年Z1期

2 萬遂人;彭麗成;;安防系統光纖信號特征提取與分類算法研究[J];科技導報;2012年36期

3 羅光明;李梟;崔貴平;鐘U，

本文編號：2021526